- Connect the USB-C 5V power supply to the equatorial mount, with a power supply capacity of at least 1A.
- Wait for the device to start and select
OG Star Tracker in the phone Wi-Fi list.
- Ignore the "No Internet connection on this network" prompt and stay connected.
- Enter
http://tracker.local in the browser address bar. Do not search for the address in the search box.
- Turn off mobile data, VPN, and "Automatically switch to better network/cellular network".
- Forget the Wi-Fi and reconnect.
- Turn off the forced HTTPS function of the browser and confirm that you are using
http://.
- Replace the USB-C cable and reliable 5V power supply and power on again.
- Use another mobile phone or computer to connect to distinguish the problem on the device side and the mobile side.
- If you can connect to Wi-Fi but the page still cannot be opened, record the phone model, system version, browser, indicator light status and fault occurrence time, and then contact support.
- Do not increase the supply voltage to "boost the signal".
- Do not flash firmware at will when there is no corresponding version of firmware and recovery method.
- Don’t mistake the “No Internet” prompt on your device’s Wi-Fi for an inevitable hardware failure.